What Are the Advantages of welding face mask？

A welding helmet is a piece of personal protective equipment used by welders to protect the user from concentrated light and flying particles. Different welding processes need stronger lens shades with auto-darkening filters, while goggles suffice for others. OSHA and ANSI regulate this technology, defining shades based on the transmittance of light.

If you are looking for more details, kindly visit T-Safety.

Purpose

Welding helmets are most commonly used in arc welding processes such as shielded metal arc welding, gas tungsten arc welding, and gas metal arc welding. They are necessary to prevent arc eye, a painful condition where the cornea is inflamed. Welding helmets can also prevent retina burns, which can lead to a loss of vision. Both conditions are caused by unprotected exposure to the highly concentrated infrared and ultraviolet light emitted by the welding arc.[1] Ultraviolet emissions from the welding arc can also damage uncovered skin (such as of the face and neck), causing a sunburn-like condition in a relatively short period of welding. In addition to the radiation, gases or splashes can also be a hazard to the skin and the eyes.[2]

All welding helmets are susceptible to damages such as cracks that can compromise the protection from ultraviolet and infrared rays. In addition to protecting the eyes, the helmet protects the face from hot metal sparks generated by the arc and from UV damage. When overhead welding, a leather skull cap and shoulder cover are used to prevent head and shoulder burns.[3]

Design

Most welding helmets include a window (visor) covered with a filter called a lens shade, through which the welder can see to work. The window may be made of tinted glass, tinted plastic, or a variable-density filter made from a pair of polarized lenses. Different lens shades are needed for different welding processes. For example, metal inert gas (MIG) and tungsten inert gas (TIG) welding are low-intensity processes, so a lighter lens shade will be preferred.

Welding goggles are protective eyewear that has dark shading, meant to protect eyes from the bright light produced by oxyfuel welding and allied processes, and also from sparks and debris.[4] Open electrical arcs (as created by arc welding and other processes) generate much higher amounts of light and UV radiation, requiring the whole face to be protected; most welding goggles do not have a dark enough shade for arc welding.

The modern welding helmet used today was first introduced in by Willson Products.[5] In , Swedish manufacturer Hornell International (now owned by 3M[6]) introduced an LCD electronic shutter that darkens automatically when sensors detect the bright welding arc,[7] the Speedglas Auto-Darkening Filter. With such electronic auto-darkening helmets, the welder no longer has to get ready to weld and then nod their head to lower the helmet over their face. The advantage is that the welder does not need to adjust the position of welding helmet manually, which not only saves time but also reduces the risk of exposure to the harmful light generated by the welding process.

Regulation

In the United States, the industry standard for welding helmets is ANSI Z87.1+, which specifies performance of a wide variety of eye protection devices. The standard requires that auto-darkening helmets provide full protection against both UV and IR even when they are not in the darkened state.[7] The standard is voluntary, so buyers should confirm that the helmet is ANSI Z87.1 compliant (indicated by appropriate labeling).

United States OSHA requirements for welding helmets are derived from standards like ANSI Z49.1, Safety in Welding and Cutting, section 7 (Protection of Personnel)[8] and ANSI Z89.1 (Safety Requirements for Industrial Head Protection).[9] OSHA also recommends certain shade numbers based on the weld's type and current rating.[10]

The edition of ANSI Z49.1.7.2.2.10 specifies that "all filter lenses and plates shall meet the test for transmission of radiant energy prescribed in paragraph 6.3.4.6 of the Safety Code for Head, Eye and Respiratory Protection, USA Standard Z2.1-".[8]

As of , OSHA's website provides standards for minimum protective shades under standard .133 (Eye and face protection), section (a)(5):[11]

As a rule of thumb, start with a shade that is too dark to see the weld zone. Then go to a lighter shade which gives sufficient view of the weld zone without going below the minimum. In oxyfuel gas welding or cutting where the torch produces a high yellow light, it is desirable to use a filter lens that absorbs the yellow or sodium line in the visible light of the (spectrum) operation.

Shades

Per ANSI Z87.1-,[12]: 42  "shade numbers" are derived as such:

Shade Number, S {\displaystyle S} , is related to luminous transmittance T L {\displaystyle T_{L}} (expressed as a fraction, not as a percent) by the equation:

S = 7 3 l o g 10 1 T L + 1 {\displaystyle S={\dfrac {7}{3}}log_{10}{\dfrac {1}{T_{L}}}+1} [12]

Contact us to discuss your requirements of welding face mask. Our experienced sales team can help you identify the options that best suit your needs.

T L {\displaystyle T_{L}} is defined with respect to CIE Illuminant A (i.e a reference point for typical domestic incandescent lighting) and the CIE Standard Colorimetric Observer.[12]

The actual ANSI-specified shades are not specific numbers, but ranges; each has a designated maximum, minimum, and nominal transmittance value. Moreover, acceptable transmittance values for far ultraviolet are far lower than those for the Illuminant A light ("shall be less than one tenth of the minimum allowable luminous transmittance").[12]

Transmittance values

While ANSI shades are ranges based on a specific illuminant, and do not directly convert into other measurements of transmittance, the following table gives a rough approximation (in terms of neutral density filter numbers and f-stops).

Notes

Further reading

While welding might seem like an easy and task, there is a lot involved in the process as it entails joining metal together through the effective use of heat and pressure. As such, it is important to take precautionary measures to ensure not only your safety but also the safety of others. Whether you're a professional welder or a novice, it is always a good idea to use gear that will protect your eyes and head while working. There are a variety of welding accessories like goggles, scarfs, and helmets, for example, designed to help you in this regard. While all of these welding precautions can keep you safe on the job, a welding helmet is by far the most important.

What is a Welding Helmet?

A welding helmet is a form of headgear designed to protect the head and eyes from sparks. Considering that most head and eye injuries are caused by sparks and ultraviolet rays, which generally occurs during welding or while using a plasma cutting machine, they are worth the investment.

Risks of Not Wearing a Welding Helmet

So what are the downsides of not wearing a welding helmet, you ask? Well, welding is a job predicated on precision and good eyesight; without eye protection, you could risk damaging your cornea, which could lead to irreparable eye damage and vision loss. Also, a welding helmet can protect your hair from being burned during the welding process.

How to Choose the Right Welding Helmet

As with most things, there are several different options available when it comes to choosing the right welding helmet. Some of the more popular options include Auto-darkening helmets that do not require you to flip open a view lid as lighting conditions change or to clear view a person or an object. These types of helmets are a godsend to most welders as they allow them to avoid neck strain and work more efficiently.

Regular Lens Helmets

Regular lens helmets are obviously not as effective as auto-darkening helmets; however, they do offer valuable head and eye protection. Ideally, these helmets are better suited for beginners and those who are uncertain about a long-term career in welding.

Variable Shade Helmets

Variable shade helmets are those that allow welders to manually adjust the viewing space of their helmets. In most cases, darkness can be toggled on a scale of 5 to 13 depending on the helmet. These helmets are ideal for welders who have to endure frequent changes in lighting conditions and need to increase or decrease shading in the process. Fix shade helmets are the least expensive choice in helmets; although they do offer some protection, they are usually not the first choice for most professional welders.

Check out our blog post about the Top 5 Best Welding Helmets of

Welding Safety & Comfort

Although this article has primarily focused on welding safety, it is important to choose a welding helmet that is comfortable to wear. This is especially important if you will be working for several hours at a time. Fortunately, many of today's helmets offer a range of viewing sizes to satisfy even the most demanding welder.

It is important to note that a large viewing size can help a welder perform his or her job better in that it provides more peripheral vision, which is helpful on large scale projects.

Auto-Darkening Helmets

In addition to more viewing options, many auto-darkening helmets now allow welders to set delays on their helmets, which increase or decrease the amount of time it takes to lighten or darken their helmets. This is a tremendous benefit for those using plasma cutting machines and those needing to quickly lighten or darken their helmets before and after a welding job.

The company is the world’s best dust proof goggles supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.