Turbo vs Continuous Diamond Blade

Contact us to discuss your requirements of segmented diamond blade vs turbo. Our experienced sales team can help you identify the options that best suit your needs.

Diamond blades are mainly used to cut hard materials. These blades are generally used in heavy metal industries. However, there are various diamond blades such as diamond turbo blade, continuous diamond blade, and segmented diamond blade. Let's understand the difference between two mainly used diamond blades: turbo diamond blades & continuous diamond blades.

Continuous Diamond Blade

The Continuous edge is quickly conspicuous because it doesn't contain portions or patterns like the other two diamond blades. This is mainly utilized for wet cutting. The expansion of water takes into account the cooling of the edge and helps eliminate garbage from the cut, the two of which would be inconceivable something else. The 10 inch continuous rim diamond blade cuts more slowly than the other two cutting edges, creating the best cut. When cutting materials that need a smooth, quality completion on the cut, or when you're worried about chipping the material, a Continuous edge is an ideal decision. It's regularly utilized with stone, marble, artistic tile, and porcelain. 

These are the cutting edges that have level nonstop edge fragments dependent on material: 

Blue 

With a 12mm high persistent edge sharp edge, it's great for use on broad structure materials and stone, especially rooftop tiles, when either wet or dry cutting. Built-up spines around the drag guarantee inflexibility and straight cutting under the most requesting conditions. Request TODAY. 

Green

 

This continuous diamond blade is used for dry or wet cutting of medium-hard tiles and ceramic tiles.

Turbo Diamond Blade

This diamond blade is particularly intended to cut quicker than different cutting edges. Indeed, even with the more modest fragments than the Segmented edge, the Turbo edge keeps the edge cool during cutting and can be utilized in wet or dry applications. Little openings are frequently utilized towards within the cutting edge likewise, which expands the cooling capacities. The Turbo diamond blade cuts comparative materials as the Segmented edge, yet can do as such quicker because of the distinction in its patterns. A more forceful cut is required when the material is very hard, a 14 inch diamond blade for concrete is the best fit. 

It is intended to cut quicker in wet and dry applications. Edges with super layered constant edge are reasonable for fired and porcelain tiles, stone, rooftop tiles, and other hard materials. 

These are the cutting edges that have level consistent edge sections dependent on material: 

Blue

The ridged consistent edge empowers smooth, excellent cutting and usability. It likewise cuts all the more forcefully on hard materials. The 12mm impregnated jewel sections give an extremely long life. Ideal for use on an exceptionally wide scope of medium to hard development materials, block paviours, rock, normal stone, rooftop tiles, and hard tiles.

If you want to learn more, please visit our website turbo blade vs segmented.

Benchmark Abrasives is one of the top abrasive providers with high-quality Industrial equipment. They offer all categories of Diamond Blades required for metal cutting applications.

nelsonxn

Registered User

Join Date: Dec 2021

Location: Michigan

Posts: 47

BTW, the mesh rim blades are still considered to be continuous rim as well, just with a mesh pattern around the rim.

I'm cutting with the Kobalt 10" wet saw. Since I'm cutting 45 degree edge bevels along 32" long porcelain tiles while leaving a 1/16th factory edge, i need the blade to stay straight and not bend or flex out. So i'm also looking for a reinforced hub. The 10" Pearl Turbo Mesh P4 blade, the 10" Kobalt Turbo Mesh Diamond blade, and the 10" RIDGID reinforced hub continious rim blade all have reinforced hubs. However, the Kobalt Mesh rim and the RIDGID continuous rim blades have the largest diameter reinforced hubs identified by the (Kobalt) blue and the (RIDGID) orange circular areas. I would think that those blades would flex or bend the least.


Is this the correct Pearl P4 Turbo Mesh blade - P4 DIA10TT?
Also the hub reinforcement seems small compared to other reinforced blades.



This is the Kobalt Turbo Mesh Diamond Blade, model: CTM10P, i was thinking of buying since it has a larger diameter hub reinforcement area



This is the RIDGID 10" reinforced HUB continuous rim blade i purchased a few days ago but have not used because I'm not sure if the mesh rim reinforced hub blades will perform better than the (non mesh) continuous rim reinforced hub blades.



This is my old continuous blade that came with the Kobalt 10" wet saw. No reinforcement at all.

It appears you both are saying the mesh porcelain blades, like the Pearl P4 Mesh rim blade, should do as good or better job at producing fine straight cuts and straight bevels with little or no chipping as a comparable continuous rim blade - correct?BTW, the mesh rim blades are still considered to be continuous rim as well, just with a mesh pattern around the rim.I'm cutting with the Kobalt 10" wet saw. Since I'm cutting 45 degree edge bevels along 32" long porcelain tiles while leaving a 1/16th factory edge, i need the blade to stay straight and not bend or flex out. So i'm also looking for a reinforced hub. The 10" Pearl Turbo Mesh P4 blade, the 10" Kobalt Turbo Mesh Diamond blade, and the 10" RIDGID reinforced hub continious rim blade all have reinforced hubs. However, the Kobalt Mesh rim and the RIDGID continuous rim blades have the largest diameter reinforced hubs identified by the (Kobalt) blue and the (RIDGID) orange circular areas. I would think that those blades would flex or bend the least.Is this the correct Pearl P4 Turbo Mesh blade - P4 DIA10TT?Also the hub reinforcement seems small compared to other reinforced blades.This is the Kobalt Turbo Mesh Diamond Blade, model: CTM10P, i was thinking of buying since it has a larger diameter hub reinforcement areaThis is the RIDGID 10" reinforced HUB continuous rim blade i purchased a few days ago but have not used because I'm not sure if the mesh rim reinforced hub blades will perform better than the (non mesh) continuous rim reinforced hub blades.This is my old continuous blade that came with the Kobalt 10" wet saw. No reinforcement at all.

__________________
Nelson

Last edited by nelsonxn; 11-15-2022 at

06:42 PM

.

Want more information on turbo vs continuous diamond blade? Feel free to contact us.