A sewer valve is unique and designed differently than any other type of water valve or gate valve. A valve used to prevent ‘backwater’ (waste water) from entering into a building from the public sewer system is exposed to corrosive water, waste, grit, and other solids. For that reason this type of valve does not use a typical ‘seated gate’ – a ‘knife edge gate’ is employed. A knife edged gate is specifically designed for controlling the flow of a wide variety of materials, such as found in pulp plant, paper plants, mining, and waste water treatment plants who’s flow contains solid materials. Unlike for instance a valve meant for drinking water.

Yaxing Valve Product Page

The unique features of a sewer ‘knife edge valve’

While a sewer check valve is more widely used than a knife edged type, this type has advantages. Unlike a check valve, which greatly reduces backwater but does not eliminate it, a knife edged valve completely 100% stops backwater from passing through it. When a property owner knows in advance when a public or city sewer system may surcharge the valve can be closed to completely prevent damage and contamination from waste water.

• The design employs a non-clogging full port opening does not restrict the flow when the valve is open.

• The stainless steel gate in the knife edge valve resists corrosion and is designed for positive and 100% closure when there is more than just liquid in the flow, such as present in a drain line.

• The stem of the valve is never exposed to corrosive waste water to ensure that it is long-lasting and reliable.

• The valve visually indicates when it is open or closed. This feature avoids unintentionally having the valve either open or closed without knowing it.

Why choose a licensed NYC plumbing firm?

Any handyman or unlicensed plumber can claim they can install a valve on a sewer line. Unfortunately the ramifications of unlicensed work goes well beyond the fact that it is not legal. Installing the incorrect valve on a house drain, or installing it in the wrong location, will have no positive affect or result. As a matter of fact installing a sewer backflow prevention device in the wrong location can hep to cause the plugs from a house trap to blow off. The result would be a flood of raw sewage into the building from the public sewer system. After sewage enters a building removing the threat of E Coli and mold will far exceed the cost of the correct backflow installation in the first place.

Balkan is expert in installing both sewer gate valves and sewer check valves. By carefully investigating different types of valves and their applications Balkan has the right product for whatever your situation calls for. By providing free site visits, and no-obligation written estimates, guesswork and vague answers are never a part of a Balkan customers experience. Balkan is professional at all times and devoted to superior customer service. If a backwater device is not the correct answer for your sewer situation an experienced representative will let you know that. Balkan will never process unnecessary or needless work orders.

Because the typical house drain in NYC is located under a finished basement floor some concrete area must be disturbed. It is usually recommended that while the area is open and exposed that the house trap is changed at the same time. A new trap ensures plumbing is water tight and with tight fitting covers. In many cases it is advisable to upgrade the sewer access pit from an unsafe and unsightly open concrete pit to a pre-fabricated access pit with a fitted and anti-slip cover. Adding these items to the scope of work adds very little to the cost and does not delay completion of the installation in any way. They offer an added degree of reliability and may prevent a trip and fall from an open or unsafe sewer access pit.

Once a property owner decides to address issues of sewer backwater it should be done correctly, permanently, legally, and address the issue once and for all.

About Balkan Sewer And Water Main Service

The Balkan Team provides expert sewer and water main repairs and replacements. We are experts in all types of NYC underground plumbing. Balkan Sewer And Water Main Service was founded in . Since its inception, the foundation of the company has been based upon integrity and honesty in all of our dealings. That solid foundation has enabled us to thrive in every economic climate.

The year actually marked our 70th consecutive year in business. As we have grown, we have become increasingly dependent upon a “Team First” approach.

A Team First Approach Ensures High Standards

What helps ensure a continuation of our high standards, overall integrity, and high company morale, is that same team approach. Complete client satisfaction has always been the number one goal at Balkan Sewer And Water Main. That is why we are NYC’s largest and most trusted sewer and water main service in New York City. Simply put, if it’s plumbing, and it’s underground, we do it. For over 70 years, and for over 90,000 New Yorkers to date, Balkan is “The Team You Trust”.

Are you interested in learning more about gate valve for sewage systems? Contact us today to secure an expert consultation!

Advantages and Disadvantages of Soft Seal Gate Valve

Advantages and Disadvantages of Soft Seal Gate Valve. The gate valve is a gate that opens and closes. The movement direction of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully opened and fully closed, and cannot be adjusted or throttled. The gate valve is sealed through the contact between the valve seat and the gate plate. Usually, the sealing surface is surfaced with metal materials to increase wear resistance, such as 1Cr13, STL6, stainless steel, etc. Gates include rigid gates and elastic gates. According to the different gates, gate valves are divided into rigid gate valves and elastic gate valves.

Gate valve movement mode:

When the gate valve is closed, the sealing surface can be sealed only by the medium pressure, that is, the sealing surface of the gate plate is pressed to the valve seat on the other side by the medium pressure only to ensure the sealing of the sealing surface. This is self-sealing. Most gate valves adopt forced sealing, that is, when the valve is closed, external force must be relied on to force the gate plate to the valve seat to ensure the sealing performance of the sealing surface.

The gate plate of the gate valve moves linearly with the valve stem. It is a rising stem gate valve.
Usually, there is a trapezoidal thread on the lift rod. Through the nut on the top of the valve and the guide groove on the valve body, the rotating motion is changed into linear motion, that is, the operating torque is changed into the operating thrust. When the valve is opened when the lift height of the gate plate is equal to 1:1 times the valve diameter, the fluid channel is completely unobstructed, but during operation, this position cannot be monitored.

In actual use

The top of the valve stem is used as a mark, that is, the position that does not open, as it is a fully open position. To consider the locking phenomenon due to temperature changes, the valve is usually opened to the top position and then retracted 1/2-1 turn as the fully open valve position.
Therefore, the fully open position of the valve is determined by the position of the gate plate (i.e. stroke). Some gate valve stem nuts are set on the gate plate, and the rotation of the handwheel drives the valve stem to rotate, thereby lifting the gate plate. This kind of valve is called a Rotating rod gate valve or hidden rod gate valve.

Advantages and disadvantages of soft seal gate valve:

Advantages of gate valves:

1. Small flow resistance. The internal medium channel of the valve body is straight, the medium flows in a straight line, and the flow resistance is small.
2. It requires less effort when opening and closing. It is compared with the stop valve, because whether it is open or closed, the movement direction of the gate is perpendicular to the direction of medium flow.
3. Large height, long opening and closing time. The opening and closing stroke of the gate is relatively large, and the lifting and lowering is performed by a screw.
4. Water hammer is not easy to occur. The reason is the long shutdown time.
5. The medium can flow in any direction on both sides, making it easy to install. The gate valve passage is symmetrical on both sides.
6. The structural length (the distance between the two connecting end faces of the shell) is small.
7. Simple shape, short structural length, good manufacturing process and wide application range.
8. The structure is compact, the valve has good rigidity, the channel is smooth, and the flow resistance is small. The sealing surface is made of stainless steel and carbide, which has a long service life. It uses PTFE packing to ensure reliable sealing and light and flexible operation.

Disadvantages of gate valves:

1. Generally, gate valves have two sealing surfaces, and the processing and manufacturing are more complicated than globe valves.
2. There is relative friction between the sealing surfaces, resulting in greater wear and tear. It is inconvenient to repair the sealing surfaces after wear.
3. The structural size of the middle cavity of the valve is large, resulting in a long structural length, large external dimensions, and large installation space. Large-diameter gate valves are especially bulky.
4. The valve takes a long time to open and close.
5. It can form a closed valve cavity, so if necessary, a pressure relief structure should be installed to prevent abnormal pressure increase in the middle cavity.

Gate valve features:

Lightweight:

The body is made of high-grade ductile iron, which is about 20% to 30% lighter than traditional gate valves and is easy to install and maintain.

Flat bottom gate seat:

Traditional gate valves often have foreign objects such as stones, wood blocks, cement, iron filings, debris, etc. accumulated in the groove at the bottom of the valve after the pipe is washed with water, which can easily cause leakage due to the inability to close tightly. The elastic seat seals the bottom of the gate valve. It adopts the same flat bottom design as the water pipe machine. That is not easy to cause debris accumulation and allows the fluid to flow smoothly.

Overall rubber coating:

The gate is made of high-quality rubber for the entire inner and outer cover. European rubber vulcanization technology enables the vulcanized gate to ensure precise geometric dimensions. The rubber and ductile cast gate is firmly connected, does not easily fall off, and has good elastic memory.

Precision cast valve body:

The valve body is precision cast, and its precise geometric dimensions ensure the sealing of the valve without any finishing work inside.

For more Valve Manufacturing Companyinformation, please contact us. We will provide professional answers.