The Power Supply is capable of supplying power to a large number of smaller devices or multiple high-current devices with a combined total output of 4 amps. A battery charging circuit current of 500mA is also provided by the power supply.
Click here to get more.
A continuous source of power is maintained with the inclusion of intelligent battery backup charging, optimal level maintenance and seamless switch on AC failure. The battery backup, AC status and core temperature are constantly monitored, and failure conditions are communicated to the Protege system.
The backup battery plays an important role in power conditioning and provides a continuous source of power in the event of a power outage.
The battery test procedure uses a proprietary algorithm to prevent deep discharge and increase battery endurance. A dynamic battery test is performed every ten minutes when mains power is present, and a battery condition alarm will be generated if the battery is disconnected or shows poor capacity. Battery fault conditions will activate the associated battery trouble input.
In addition to the dynamic battery test procedure the power supply performs a battery presence test every 60 seconds. If no backup battery is detected a battery condition alarm will be generated and the associated trouble input will be activated.
Upon reconnection of mains power the power supply automatically detects the backup battery and begins controlled charging.
If you want to learn more, please visit our website TDX.
The power supply is able to relay information about critical system voltages, currents and core temperature to the Protege GX integrated system controller.
The controller can then store these values in variables which can be viewed live from the Protege GX system interface and monitored on a status page or floor plan, along with logging for review at any time.
The power supply has two 50mA outputs that can operate as either programmable outputs or predefined status outputs.
While in online mode the two outputs function as programmable outputs and can be used to activate bell sirens, lighting circuits, door locks, relay accessory products and other automation points.
While in offline mode the two outputs function as status outputs. In addition to the comprehensive front panel diagnostic indicators these status outputs offer additional information that can aid in diagnosing faults and conditions.
If you are looking for more details, kindly visit Power Adapter for ICT Equipment(sv,tr,es).
Comments
Please Join Us to post.
0